Application-Tested Handling
Product transfer and pack formation are confirmed around representative samples.
Conveying Systems
MC-200 Modular Conveyor System
A configurable conveyor family for product transfer, accumulation, elevation and production-line balancing, designed around the product and factory layout.
1,500+equipment Varieties
Flexiblemodel MOQ
ExportDocument Support
MC-200 Modular Conveyor System
Series MC-200
A configurable conveyor family for product transfer, accumulation, elevation and production-line balancing, designed around the product and factory layout.
Recipe-Based Changeover
Stored settings and guided adjustments support multiple product formats.
Integrated Line Interfaces
Signals, transfer heights and accumulation logic are defined with adjacent equipment.
International Project Support
Electrical standards, documentation and commissioning scope can be adapted by market.
Technical Specifications
- Conveyor Width
- Configured by product
- Conveyor Speed
- Fixed or variable
- Belt / Chain
- PVC / PU / modular plastic / roller
- Frame
- Painted steel / stainless / aluminum
- Guides
- Fixed or adjustable
- Drive
- Gearmotor or drum motor
Equipment Snapshot
Key Performance and Configuration Information
Demonstration figures show how a professional equipment page can present the operating range without hiding project-dependent conditions.
- Conveyor Types
-
Belt / modular / roller
Selected by product and environment.
- Layout Options
-
Straight / curve / incline
Custom elevations and transfers available.
- Accumulation
-
Passive or controlled
Zone logic based on product pressure tolerance.
- Controls
-
Standalone or integrated
Line handshakes and status reporting available.
Equipment Overview
Application-Engineered Equipment, Not a One-Size-Fits-All Machine
The MC-200 family includes belt, modular-chain and roller conveyor sections for straight transfer, curves, inclines, declines and controlled accumulation. Each section is selected around product contact, load, speed, cleaning, access and the surrounding equipment.
A conveyor project is more than a drawing of horizontal lines. Transfer gaps, guide geometry, support spacing, drive location, maintenance access and control zones determine whether the material flow remains stable.
The system can operate as independent sections or as a coordinated line with zone control, upstream and downstream handshakes, production status and fault management.
- Mechanical and electrical engineering
- Assembly, programming and dry-run testing
- Documented FAT before shipment
Technical Specifications
Series MC-200 Technical Data and Project Conditions
Final values are confirmed after sample, layout, utility and interface review. Each row can include an explanatory note instead of presenting isolated numbers.
- Conveyor Width
-
Configured by product
Includes guide clearance and format range.
- Conveyor Speed
-
Fixed or variable
Line balance and product stability determine speed range.
- Belt / Chain
-
PVC / PU / modular plastic / roller
Contact material selected for load and cleaning.
- Frame
-
Painted steel / stainless / aluminum
Selected for environment and load.
- Guides
-
Fixed or adjustable
Profile and support depend on product geometry.
- Drive
-
Gearmotor or drum motor
Location selected for access and transfer design.
- Control Zones
-
Optional photo-eye zoning
Used for accumulation and line balancing.
- Supports
-
Floor-mounted or suspended
Leveling range and anchors are defined in layout.
Project Advantages
What the Technical Scope Is Designed to Control
These benefits come from application review, defined interfaces and measurable acceptance criteria rather than decorative feature claims.
Product-Specific Transfer Design
Belt, guide and gap geometry are selected around the actual contact points and stability limits.
Balanced Production Flow
Accumulation and release logic reduce unnecessary stops between machines with different cycle behavior.
Maintainable Layout
Drive access, cleaning clearance, removable guides and service zones are considered during layout review.
Expandable Controls
Sections can begin as standalone equipment and later connect to line-level status and recipes.
Typical Applications
Where Series MC-200 Can Be Configured to Operate
Application suitability is confirmed against real samples, speed and environmental conditions before the final machine configuration is released.
Container and Carton Transfer
Stable transport between filling, labeling, packing and inspection equipment.
Accumulation and Buffering
Controlled product storage to balance short machine interruptions.
Elevation Changes
Incline, decline, spiral or lift interfaces where floor space is limited.
End-of-Line Pallet Flow
Case, pallet and wrapper conveyors with status handshakes.
Configuration & Integration
Define the Machine Boundary Before Drawings and Software Are Approved
A complete quotation identifies what the machine receives, what it delivers and which functions belong to adjacent equipment or the customer site.
-
Mechanical interface
Transfer height, product orientation, access, guarding and installation clearances.
-
Electrical and controls interface
Power, safety, run permission, fault status, speed references and network connections.
-
Project responsibility boundary
Samples, utilities, local work, lifting, installation, validation and site acceptance responsibilities.
Operating Sequence
How the Conveyor System Controls Product Flow
Each zone has a defined transfer purpose, speed relationship and response to downstream availability.
-
01
Product Entry
The product is accepted from upstream equipment at the defined height, speed and orientation.
-
02
Guided Transfer
Belt, guides and supports maintain stability through straight sections and direction changes.
-
03
Zone Control
Sensors and drives start, stop or release products according to downstream demand.
-
04
Accumulation
Products buffer with controlled pressure or zero-pressure separation where required.
-
05
Equipment Handover
The product leaves at the agreed position, spacing and signal condition.
Configuration Comparison
Compare Common Conveyor Technologies
Use the same comparison factors when evaluating competing technical proposals.
| Selection Factor | PVC / PU Belt | Modular Plastic | Powered Roller |
|---|---|---|---|
| Best for | Small products and general transfer | Curves, washdown and robust handling | Cartons, totes and accumulation |
| Product contact | Continuous flat surface | Linked plastic modules | Individual rollers |
| Curves | Special belt or separate section | Flexible curved layouts | Curved roller sections |
| Cleaning | Material dependent | Open structure options | Best for dry logistics |
| Accumulation | Limited by product pressure | Possible with selected chain | Strong zone-control options |
Technical Review
Evaluate the Equipment from Product Input to Lifecycle Support
Each tab answers a different procurement question and demonstrates a deeper product-content structure.
Define the Contact and Stability Limits
Dimensions, base shape, weight, softness, center of gravity and allowable back pressure determine the belt, guides and transfer details.
Coordinate Heights, Curves and Operator Access
Scaled layouts include equipment footprints, columns, aisles, drains, maintenance zones and realistic transfer points.
Balance Machines Without Damaging Products
Buffer length, zone size, release logic and allowable product contact are selected around real stop durations and line behavior.
Define Standalone and Line-Level Logic
Run permission, fault status, blocked conditions, speed references and line-stop philosophy are documented for every interface.
Keep Drives, Belts and Guides Accessible
Drive location, belt replacement, guide removal, cleaning and spare-parts standardization are considered before fabrication.
Factory Acceptance Testing
A Written FAT Connects the Technical Proposal to Shipment Approval
Testing uses agreed samples, functions and acceptance methods. Project-dependent items are recorded rather than hidden.
- 01
Layout and Elevation Check
Verify section lengths, transfer heights, supports and maintenance clearances.
- 02
Product Transfer Test
Run minimum and maximum products through joints, curves and guide transitions.
- 03
Accumulation Test
Simulate downstream stops and confirm release order and product condition.
- 04
Interface Signal Test
Check run permissions, faults, blocked status and restart behavior.
- 05
Noise and Access Review
Inspect operating noise, guarding, cleaning access and service points.
Procurement Risk Review
Questions That Should Be Resolved Before Purchase Order
A professional product page should make risk and project assumptions visible, not only list attractive features.
Common Risk
Technical Response
Rated speed is quoted without product and operating assumptions.
Tie output to approved samples, format, buffer condition, reject logic and FAT method.
Machine boundaries and adjacent-equipment responsibilities are unclear.
Approve a layout, interface list and responsibility matrix before manufacturing.
Installation and ramp-up support are discussed after shipment.
Define site readiness, commissioning, training, spares and remote support in the project scope.
Project Documents
Documents Used from Technical Confirmation to Handover
These demonstration resources show how an independent site can present technical depth and reduce uncertainty before inquiry.
Equipment FAQ
Questions Buyers Ask Before Configuring Series MC-200
The answers identify what must be confirmed during technical review instead of presenting unsupported guarantees.
Which conveyor type is best for my product? +
The decision depends on product base, weight, stability, cleaning, accumulation and required curves. A product sample and layout are more useful than selecting by belt material alone.
How much accumulation is required? +
Buffer length should be based on expected stop duration, line speed, product pitch and allowable pressure. The control philosophy is reviewed together with physical length.
Can the system include curves and elevation changes? +
Yes. Curved, incline, decline and lift solutions can be combined, subject to product stability and available footprint.
Can existing machines be connected? +
Yes. We need transfer heights, product exit conditions, available signals, speed ranges and maintenance access around the existing equipment.
How are conveyor sections controlled? +
Sections may run continuously, follow a speed reference or use sensor-based zones. The line-stop and restart behavior is defined in the interface list.
What documentation is supplied? +
Typical documents include general arrangement drawings, electrical diagrams, component lists, manuals, lubrication information and recommended spare parts.
Related Equipment
Build the Surrounding Automation Cell
Review upstream, downstream and complementary equipment using the same structured product system.
Buyer Resources
Plan the Project Before Comparing Quotations
Long-form selection guides help buyers prepare better inputs, evaluate suppliers and define acceptance criteria.
Request a Technical Proposal
Send the Product, Speed, Layout and Interface Requirements for Series MC-200
Attach representative product photos, drawings, packaging information or a short production video. The first response should identify missing technical inputs and a practical next step.